Comentarios sobre el tema "El Jaragan(809eg6) Build de K20a.org" en Razine.com - Comunidad de Miembros dentro de nuestro popular foro de Honderos; Was up guys this is my first car. i bought it as a shell and build it with b16a2. i used it to drive around go to school hang out ...

Nuestro foro de Honderos se describe como: powered by Honda..

Página 1 de 2 1 2 ÚltimoÚltimo
Resultados 1 al 10 de 15
  1. #1
    Avatar de M0bMan
    M0bMan está desconectado Moderator super avanzado
    Fecha de ingreso
    28 feb, 06
    Ubicación
    @ Home
    Edad
    30
    Mensajes
    8,938
    Poder de reputación
    0

    Predeterminado El Jaragan(809eg6) Build de K20a.org

    Was up guys this is my first car. i bought it as a shell and build it with b16a2. i used it to drive around go to school hang out wit bitches and go to the races. the b16 moved fast as fuk. i was next to b20s like nuttin. but i graduated from high school in may and i was like fuk it ima make it k series. so i bought my self a em2 automatic with 20 thousand miles and juss had my car at the shop or my house. i started buying k stuff little by little and it didnt work out so i sold everything and started from scratch and bought a brand new 06 type s with 30k miles at the auctions. and bought everything i needed little by little. here are some before and after pics. i will post more pics and updates tomorrow or monday i gotta watch the fight and go chill drink. thanks and K power.












    I wet sanded her to send her to paint a couple week backs. ima post more updated pics later. but theses are some quick ones i took.



    REAR 5 LUG GONNA PUT IT ON PROBABLY TOMORRROW




    FORGET A/C AND I HAD TO REMOVE MY DASH FOR I CAN DO THE BRAKE TUCK TOMORROW WILL KEEP YOU GUYS UPDATED

    MOTOR CAME IN AND I GOT HER THERE JUSS CHILLING ILL PUT HER IN PROBABLY LIKE IN 2 DAYS BEEEN TO BUSY


    here are some pics of today. we were so busy that i barely took pics so i will take more pics tomorrow. but heres a lil update . im not in the pic cause i had to take the picture.
    pulled out the tent and got my people from ft meyers helping me out. thamks alot to T- Ali Motorsports

    workin on the hatch been to lazy to put the rrear 5 lug probably this week.

    cell phone gay pick but i still gotta respray the whole engine bay too tired for today.

    front brake tuck

    relocating the prop valve. and put some of the fittings


    juss got out of school and hanging out these are some of the pics i will update next week or this weekend on my wire tuck and harness and etc.

    a little something for now gonna paint her asap


    furel relocator with the fitting

    the clutch line and wanted this line through here. fuk it gotta clean the bay up my whole car got fuking hand prints lol


    a little bit more gonna clean her this week and take off sound detning.




    good bye 4 lug

    grinding down wea the b series mount was juss making it smoother.


    damn my face was dirty and i didnt have gogles on not cool totally unsafe lol

    ima make it smoother and clean the shit out of the bay and more


    cutting off that 2.25 pipimg and exhaust ftw open header now fuk it lol jk dont know yet will post more pics tomorrow

    shitty night pic from phone will post better tomorrow
    rear 5 lug extended studs


    some brake tuck pics i found



    today after cleaning up the bay a lil. wet sanding and degreasing and cleaning it up a little. ima paint her 24k gold saturday lmk see how it comes out.


    it feels smooth as hell now

    painted brake booster

    my cleaning tools lol they worked good ive used better liquids but these do the job

    im ready to paint the bay for saturday lmk see how it comes out


    umm wen i was painting the bay. this is how the hatch looks now its wet sanded. juss gotta do a lil body work and paint this slut lol i put her high for now till i finish everything

    the body work and stuff always a first time for everything

    tape the shit out of the brake booster lol

    tools and etc

    this is juss my base




    50/50 lol half base half gold look at the diffrence

    the gold no clear yet ima do the clear tomorrow


    looks way better than before go re look at how it use to look

    painted the mount

    shitty as fuk camera picture. my phone has some gold now lmao i hate this pic but had to post it up. ughhhh i need a new phone lol


    removed the sound detning and cleaned it up a lil will post old pic of wen removed later

    cleaned up the engine harness and remounting it. was rushing and forgot to tape

    so i retaped it and i gotta remount it back on. i was tired.

    some parts im putting on will post part that i have this week i have to take em out of boxes.


    my dash harness and conversion harness is done everything is saudered and elimanated uneeded wires. THanks also to that clean ass Sparkks Conversion Harness made it look even cleaner THanks Corey For the Harness and great cutomer service.


    Relocated the fusebox

    Wire tuck for lights driver side

    Wiretuck Passenger side gotta finish it

    The carpet I juss threw it in there for now

    Skunk2 Camber kit Installed

    Redoing The engine Bay. Ima repaint it and put clear and everything tomorrow



    Rcrew header


    waking up early tomorrow and sanding down the whole bay and repainting the whole engine bay. so im done for the night here are some pics and update for today. worked on it for a lil. did alarm, remote start, tracking device, backup battery, 6 sirens, drilled passenger side wholes, vaccum the whole car and put the carpet and etc.
    The tools of the night lol

    Preping up the alarm and remote start




    Saudering the remote start and alarm

    Ran out of tape so ima tape it up tomorrow

    Passenger Side Wiretuck

    Drilled the holes for the mount. Bigger whole since i used diffrent bolts bigger and grade 8 since i lost the 2 that goes there

    Perfect
    #ElMitoCRX / #LaAntiBalas
    Bamboo Performance
    Instagram: @m0bman
    Whatsapp: 9292405419

  2. #2
    Avatar de M0bMan
    M0bMan está desconectado Moderator super avanzado
    Fecha de ingreso
    28 feb, 06
    Ubicación
    @ Home
    Edad
    30
    Mensajes
    8,938
    Poder de reputación
    0

    Predeterminado

    new seats ima use these and my black ap1 s2ks. they look clean. i havent mounted them yet juss threw some sweaters i wanted to see how they look.\

    Cleaned up the garage and ima put my asr brace tomorrow or something.


    K-Tuned Products came in and i love their products. (no homo lol)
    the shipping box

    all the Products and no heater for now and no more looping hoses.

    Stock Thermostat Housing Plug & Bracket

    Temp Sensor adapter

    Heater outlet Plug

    Fuel Filter

    The New Mean Looking Shifter Plate lol




    not sleeping tonight installing these parts more update pics in a couple more hours.

    More pics Labeling the shifter box and ready to cut.
    (Found the sticker thought it looked Cool)








    Gonna start Cutting for i can mount the shifter box



    Juss test fitting

    i think this pik looked cool lol


    im going to post more pictures of the shifter box done with cables raned and everything tomorrow is that i gotta cut weights off the shifter cables.

    Got more parts in today ( I gotta buy the belt tomorrow)

    Un wrapping the Motor(Z1)








    I had to cut that because i have the old bracket but it was no trouble


    Painted it looks clean

    Done

    Close up

    Ac/ps Gone Juss Need belt now

    The Shifter Whole it came out ok (Painted the whole Front floors)

    Tranny mount installed

    Heater Delete This can be purchased at www.k-tuned.com . or contact Mike@K-Tuned on this site. so no more looped hoses.


    Installed

    Done for tonight

    All the mounts were installed heater delete, plug and bracket and etc

    pics. i wi8ll post better pics of the shifter box and i jack it back up to put the silicone.



    the rope hanging out the engine bay. i forgot to take it out



    Did the bay today with clear and stuff no more messing with the bay for now. i think i have no fingerprints thanks to the sand paper lol
    The base

    the gold

    Messy as fuk

    a little high pic

    tOOK OF THE TAPE OFF THE BRAKE LINE TUCK TO SEE HOW IT LOOKS. I LOVE IT LOL

    GOT HER PRETTY HIGH IMA SLAMM HER WHEN I PUT SOME NICE WHEELS NEXT WEEK


    bIRDS VIEW LOL


    iT GOT LATE. THIS IS A NIGHT PIC FOR THE NEW BAY

    mESSY GARAGE. I ORGANIZED EVERYTHING AS SOON AS I FINISHED PUSHING HER INSIDE


    Took all the tape and etc.


    Did the heater hose delete with bracket from k tuned.

    Gonna put the motor in the morning i was gonna put it tonight but it was to late to turn on compressor and double check all the mounts and etc.


    As of now as we speak. Im alone so ima finish this like in 4 to 5 minutes and upload more pics later.


    I was tightning up all the screws and mounts etc.

    Motor In juss gotta double check all the screws nice and tight tomorrow.




    The new Radiator resevoir fuk that plastic oem lol



    My Rbc its gonna ported tomorrow by Twister Engines. It already was mildy ported but juss gonna get it completely ported

    Bdl 70mm with Karcepts adapter

    Aeromotive Fpr

    Competition Clutch Twin disk


    Cleaned up the headers and installed them last night



    Picked up some parts that i ordered today.




    took off the stock fuel rail and hated the way the way the wiring came in that plastic cover shiel so i took it off and ran the wires like this for a cleaner look

    New Golden eagle fuel Rail

    Installed the rail.

    Installing the temp sensor and adapter




    Tomorrow i will post more pics of the fuel lines and etc

    new parts fittings and fuiel lines its either braided or nothing lol




    i will post better pics later these are shitty cell phone pics and i gotta paint my valve cover and remove the spark plug cover. painted it white for the fun of it
    My own custom fuel setup i guess lol

    made my own bracket for the fpr came out perfect. juss waiting for the liquid gauge to come in

    Ran this line like this

    fuel filter, fuel hard line fitting


    wea here are some pics from like last week of the charge harness and stuff. i still gotta fix the charge harness by the block and stuff ima focus on the details tomorrow morning but here it goes. i made my own charge harness. 4 gauge wire nothing crimped up everything new and solid power.



    i was super tired this is were i left it off but everything gonna be perfect tomorrow morning

    that silver power wire was juss to see if that car starts and light and stuff. that will not be there. everything works perfect.


    heres my modified radiator. im putting it passender side because im going with a v stack. if u need one lmk ima start selling them so spread the word if u want one. heres my prototype lol.
    i painted it cause it was dirty and i had dead flies so i cleaned it then painted it

    done a quick lil paint

    Modified rad.

    With the k tuned hoses. look at my ghetto grounds lol. i juss did them to start the car, i have new ones mad with terminal ready to put on whoop whoop lol




    new parts that came in and stuff
    liquid filled gauge


    k- tuned hoses and clamps. thanks mike

    #ElMitoCRX / #LaAntiBalas
    Bamboo Performance
    Instagram: @m0bman
    Whatsapp: 9292405419

  3. #3
    Avatar de M0bMan
    M0bMan está desconectado Moderator super avanzado
    Fecha de ingreso
    28 feb, 06
    Ubicación
    @ Home
    Edad
    30
    Mensajes
    8,938
    Poder de reputación
    0

    Predeterminado

    got my plugs in today.
    im also selling my rhd itr cause i got a eg one on the way ima post more pics in a few



    these are some pics from this week. i gotta install my new 5 lug. and the apexi n1 damper kit. but ima clean the suspension good and the coilovers all good. also got braided lines for the calipers. and heres my rhd if the eg one i ordered dont come in time ima juss put the itr are one and put the eg dash wen i get it.





    wen i sold the motor



    yea ima do it and i have my k24 block ready juss waiting for those 13.5 pistons to come in for i can send it to my engine builder. heres a lil pic for u lol



    heres a picture of the clip the dash is rip but i got the whole dash reapoulstered so its gonna be spanking new. these were dirty pics wen i clean it ill take pics.
    dirty pics. theres like madd grass and lots of dirt and dust. ima vaccum and dust everything thing it for it can be clean wen i pull it apart




    umm some updates i stripped the rhd dash completely. here are some pics. my camera was charging when i started taking off the dash and the ac boxes,


    dirty as hell so i had to clean it here are some before and after



    my faforite tool lol


    garbage sir fenders

    removing



    cleaned it up a lil



    wasnt heavy


    washed her up a lil cause she was filthy and smelling bad




    it came with original keys i love it lol


    umm here are some pics of me taking off the spot welds and burning off the sealent and etc.
    i painted everything like that i can burn off the glue and that sealent etc thats on the chasis.


    did a couple of spotwelds



    heres a lil video
    #ElMitoCRX / #LaAntiBalas
    Bamboo Performance
    Instagram: @m0bman
    Whatsapp: 9292405419

  4. #4
    Avatar de melvinbrian
    melvinbrian está desconectado Senior Member veterano
    Fecha de ingreso
    15 may, 08
    Ubicación
    Bonao City
    Edad
    35
    Mensajes
    660
    Poder de reputación
    0

    Predeterminado

    UFFFF muy buen Build UP !

  5. #5
    Avatar de M0bMan
    M0bMan está desconectado Moderator super avanzado
    Fecha de ingreso
    28 feb, 06
    Ubicación
    @ Home
    Edad
    30
    Mensajes
    8,938
    Poder de reputación
    0

    Predeterminado

    some parts i bough today and stuff.
    i bought 3 juss in case it brakes dont wanna drive up and down lol


    spot welds off some


    i have like 20 spot welds left. my battery died ill post more pics tomorrow

    heres the windshield removed.still trying to recover pics that got deleted or wat not. ill add as i find them. ill put them in order.
    getting ready to take off all the paint off the bay and mildly shave it and paint it baby blue after i do the rhd.



    took out the motor with radiator and all in 20 minutes


    dirty pic i found

    before taking off the firewall and sealer i already had heated up the paint a lil thats why its bubled up. i had put aircraft remover spray can one.


    painting engine bay this color. ithink it will look good with my kevlar parts and spoon caliper.


    firewall pic its laying there juss waiting for me to remove my lhd one.
    #ElMitoCRX / #LaAntiBalas
    Bamboo Performance
    Instagram: @m0bman
    Whatsapp: 9292405419

  6. #6
    Avatar de M0bMan
    M0bMan está desconectado Moderator super avanzado
    Fecha de ingreso
    28 feb, 06
    Ubicación
    @ Home
    Edad
    30
    Mensajes
    8,938
    Poder de reputación
    0

    Predeterminado

    started removing all the lhd brackets for i can put all the rhd ones. like fusebox bracket, hood latch bracket and fuel latch also.


    removed the usdm vin for i can put it on the rhd firewall

    test fitment before welding

    my dash came messed up so i fixed here



    done better than how it was fuk ittt lol



    ima resand it lightly and repaint it. give it like 2 coats.

    rhd bracket


    this how we do it


    gonna strip the rear tomorrow gonna take everything out

    #ElMitoCRX / #LaAntiBalas
    Bamboo Performance
    Instagram: @m0bman
    Whatsapp: 9292405419

  7. #7
    Avatar de AcElErOmEtRo
    AcElErOmEtRo está desconectado Senior Member avanzado
    Fecha de ingreso
    17 abr, 09
    Ubicación
    jodiendote :P
    Mensajes
    1,330
    Poder de reputación
    0

    Predeterminado

    muy bueno el build up y esa EG ta bonita
    ¨if in doubt flat out¨ - Colin McRae
    Diego Jimenez Photography
    http://www.flickr.com/photos/acelerometro/

    WA: 829-340-5107

  8. #8
    Avatar de luismugen
    luismugen está desconectado Senior Member medio
    Fecha de ingreso
    26 feb, 08
    Ubicación
    Santiago
    Mensajes
    412
    Poder de reputación
    0

    Predeterminado

    Mi MADREEEEE!!!! 8O 8O k Build UP compadre, Mob la mas minima cosa subela loco k ese Build UP ta de pinga men muy dura la EG

    CIVIC EK3 d15b vtec 1.5 stock

  9. #9
    Avatar de jdmshop
    jdmshop está desconectado Senior Member super avanzado
    Fecha de ingreso
    24 nov, 07
    Ubicación
    Santiago De Los Caballeros, Santiago, Dominican Republic, Dominican Republic
    Mensajes
    3,542
    Poder de reputación
    0

    Predeterminado




    hey lo uniko q tiene ese proyecto como el mio son las suspenciones q coinsidencia las mismitas

  10. #10
    Avatar de mr_lancerlot
    mr_lancerlot está desconectado Senior Member super avanzado
    Fecha de ingreso
    22 ene, 07
    Ubicación
    EN MI PENTHOUSE
    Mensajes
    4,374
    Poder de reputación
    0

    Predeterminado

    wow hermoso proyecto.

    MITSUBISHI RA @ 15.98 AT. y SIN NOS LLEGO SR WONKA
    IM SO JDM, THAT I EAT SUSHI EVERY DAY

Página 1 de 2 1 2 ÚltimoÚltimo

Temas similares

  1. Honda's JDM ONLY! & Build ups!!
    Por SLaYYeRR en el foro Honderos
    Respuestas: 18504
    Último mensaje: 08/05/2017, 17:12
  2. My Prelude BB8 Build!
    Por M0bMan en el foro Honderos
    Respuestas: 974
    Último mensaje: 27/04/2012, 10:21
  3. Luis20v build
    Por miguel-avc en el foro Honderos
    Respuestas: 10
    Último mensaje: 25/04/2010, 12:13
  4. zc project build?
    Por 2jc en el foro Consultas Mecanicas
    Respuestas: 2
    Último mensaje: 29/10/2008, 00:17

Marcadores

Permisos de publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •  

Razine.com, powered by: